Gate Valve Electric Actuator for Dust Removal Discharge Control of Blanking System

• Customization: Available
• Type: Customized, Cusomized
• Material: Customized, Cusomized
• Model NO.: Gate Valve
• Feature: Oil-Resistant, Acid And Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant, Oil-Resistant, Acid and Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant, Oil-Resistant, Acid and Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant
• Tensile Strength: Customized, Strong
• Temperature: Ordinary Temperature
• Pressure: Ordinary Temperature
• Actuator: Electric
• Seal Surface: Wedge Gate Valve
• Thread Position of Valve Rod: Outside Gate Valve
• Usage: Temperature Control, Flow Control
• Standard: GB
• Application: Industrial Usage, Water Industrial Usage, Household Usage
• Media: Material
• Connection Form: Lug Support
• Driving Mode: Electrical
• Structure: Single-Eccentric Sealing
• Seal Form: Force Sealed
• Valve Stem: Orbit
• Work Pressure: MID-Pressure (2.5MPa< Pn <6.4MPa)
• Material of Seal Surface: Metal Hard Sealed
• Valve Body: Sheet Metal
• Transport Package: Wooden Case
• Specification: As per drawing
• Trademark: X-Ing
• Origin: China
• HS Code: 8
• Production Capacity: 500sets/Month

Product Description

Dust removal and flexible electric plate gate valve Discharge control device of blanking system

Product introduction:
Electric plate gate valve is designed and manufactured from years of experience in the use of flapper valve,
mainly used in regulation of dust removal, wind conveying and adjustment in the piping of exhaust system,
regulation and cutting of the solid powder conveying. The valve is made of high-quality steel welding, with a
simple structure, ease of operation, flexible sliding valve plate, excellent sealing performance and other
characteristic. Little local resistance loss, good regulation performance, easy maintenance and demolition, not
easy to deformation, to overcome the problem of leakage, deformation and difficult to adjust from the old gate
valve. Especially for conveying non-viscous solid powder and less thanφ10mm granular material crystal material
and solid material.

Technical parameters:

Model	Main dimension																Linear actuator model	Power (Kw)
	A	B	C	F	E	P	H	S	J	D	L	M	R	T	N x a	n-Φ
Z-40	400	790	420	640	610	540	200	165	80	95	1285	100	1050	8	3x160	24-22	Z-40	1.10*2
Z-50	500	890	520	740	710	640					1485		1150		3x195		Z-50
Z-60	600	990	620	840	810	740					1685		1250		4x170	32-22	Z-60
Z-70	700	1090	720	940	910	840	250		100	85	1925	125	1350	10	4x198		Z-70	1.50*2
Z-80	800	1190	830	1050	1015	950				90	2135		1460		5x178	40-22	Z-80
Z-90	900	1290	930	1150	1115	1050					2335		1560		5x198		Z-90
Z-100	1000	1390	1030	1250	1215	1150	320		120	75	2570	160	1675	12	5x220	40-26	Z-100	2.20*2
Z-120	1200	1590	1230	1450	1415	1350					2850		1875		5x260		Z-120

Our workshop


Our sales team

Our Service

1.Design Services
Our design team has experience in cardan shaft relating to product design and development. If you have any
needs for your new product or wish to make further improvements, we are here to offer our support.

2.Product Services
raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing Fashioning
→Cleaning→ Assembly→Packing→Shipping

3.Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your
need.

4.Research & Development
We usually research the new needs of the market and develop the new model when there is new cars in the
market.

5.Quality Control
Every step should be special test by Professional Staff according to the standard of ISO9001 and TS16949.

6.Certification
Should your products require testing and certification to comply with international standards, we can arrange
this with independent, fully recognized testing companies such as SGS, Intertec, Bureau Veritas, Lloyd's
Register or the testing company of your choice.