DYTF Series Electric Motor Hydraulic Cylinder
Introduction:
DYT series Electro-hydraulic pusher is a set machine, electricity, liquid as one of the hydraulic driving
device, can be widely used in metallurgy, building materials, chemical industry, lifting the transport and port
handling machinery, the valve gate, reversing, tilting, swing and other mechanical drive control amount, can
replace the traditional electric putt, hydraulic cylinder ( with a hydraulic station drive ) and cylinder ( by
pump station drive control ).
The electric hydraulic push rod has the advantages of small volume, flexible operation, stable work
characteristics, can start with load, push and pull, with overload protection device. Can adapt to control
operating distance, risk and high altitude areas. The push and pull type with a single push, pull and push and
pull single; speed type push, pull, push and pull speed speed speed speed or not; locking type push, pull, push
and pull lock lock lock or push and pull is not locked. Pusher stroke: 50 ~ 3000mm.
Technical parameters:
| Model |
Pushing Power (10N) |
Pulling power (10N) |
Push Speed |
Pull Speed |
Motol Type |
Stroke
(mm) |
| DYTF450-/100 |
450 |
310 |
150 |
180 |
Y90S-4-0.75KW |
50-1000 |
| DYTF700-/100 |
700 |
500 |
100 |
100 |
Y90S-4-1.1KW |
50-1500 |
| DYTF1000-/100 |
1000 |
310 |
100 |
100 |
Y90L-4-1.5KW |
50-1500 |
| DYTF1750-/80 |
1750 |
1300 |
80 |
80 |
Y100L1-4-2.2KW |
50-2000 |
| DYTF2500-/80 |
2500 |
1900 |
80 |
80 |
Y100L1-4-2.2KW |
50-2000 |
| DYTF3000-/80 |
3000 |
2200 |
80 |
80 |
Y100L2-4-3KW |
50-2000 |
| DYTF4000-/60 |
4000 |
3000 |
60 |
60 |
Y100L2-4-3KW |
50-2000 |
| DYTF5000-/60 |
5000 |
3800 |
60 |
60 |
Y112M-4-4KW |
50-2500 |
| DYTF7000-/50 |
7000 |
5200 |
50 |
50 |
Y112M-4-4KW |
50-2500 |
| DYTF8500-/40 |
8500 |
6000 |
40 |
40 |
Y132S-4-5.5KW |
50-2500 |
| DYTF10000-/30 |
10000 |
7500 |
30 |
30 |
Y132S-4-5.5KW |
50-2500 |
| DYTF15000-/30 |
15000 |
11000 |
30 |
30 |
Y132M-4-7.5KW |
50-2500 |
| DYTF20000-/20 |
20000 |
15000 |
20 |
20 |
Y132M-4-7.5KW |
50-2500 |
| Type |
Rated output force(kgf) |
Rated speed(mm/s) |
motor model |
Stroke range(mm) |
Speed
range (mm/s) |
| Thrust |
pull |
Push Speed |
Pull speed |
| DYTF450-/110 |
450 |
310 |
110 |
140 |
Y802-4-0.75KW |
50-800 |
30-110 |
| DYTF700-/110 |
700 |
510 |
110 |
140 |
Y90S-4-1.1KW |
50-1500 |
30-110 |
| DYTF1000-/110 |
1000 |
750 |
110 |
140 |
Y90L-4-1.5KW |
50-1500 |
30-110 |
| DYTF1750-/90 |
1750 |
1300 |
90 |
115 |
Y100L1-4-2.2KW |
50-2000 |
10-90 |
| DYTF2500-/90 |
2500 |
2050 |
90 |
115 |
Y100L2-4-3KW |
50-2000 |
10-90 |
| DYTF3000-/90 |
3000 |
2500 |
90 |
115 |
Y100L2-4-3KW |
50-2000 |
10-90 |
| DYTF4000-/90 |
4000 |
2950 |
90 |
115 |
Y112M-4-4KW |
50-2000 |
10-90 |
| DYTF5000-/90 |
5000 |
3300 |
90 |
115 |
Y132S-4-5.5KW |
50-2000 |
10-90 |
| DYTF6000-/50 |
6000 |
3800 |
50 |
80 |
Y112M-4-4KW |
50-2500 |
5-50 |
| DYTF7000-/50 |
7000 |
4500 |
50 |
75 |
Y112M-4-4KW |
50-2500 |
5-50 |
| DYTF8000-/50 |
8000 |
5000 |
50 |
80 |
Y132S-4-5.5KW |
50-2500 |
5-50 |
| DYTF10000-/40 |
10000 |
6500 |
40 |
60 |
Y132S-4-5.5KW |
50-2500 |
5-40 |
| DYTF15000-/40 |
15000 |
11000 |
40 |
55 |
Y132M-4-7.5KW |
50-2500 |
5-40 |
| DYTF20000-/40 |
20000 |
15000 |
40 |
50 |
Y132M-4-11KW |
50-2500 |
5-40 |
Main characteristics:
1, compact structure, convenient installation, small occupied space, easy maintenance;
2, circuit is provided with a bidirectional pressure self-locking device, can be in the range of travel stop in any
position and self locking, and maintain constant output force;
3, when the accident off, push rod can be automatically locked in this position, to avoid the generation of
accidents;
4, all concentrated in the hydraulic device inside the body, without external pipelines, oil seal are imported
brand-name seal, the sealing effect is good, no liquid leakage pollution, and long service life;
5, simple electronic control, through the addition of a limit switch, is easy to realize the remote and dangerous
regional operations control, automatic control and computer ( PLC ).
Our Service
1.Design Services
Our design team has experience in cardan shaft relating to product design and development. If you have any
needs for your new product or wish to make further improvements, we are here to offer our support.
2.Product Services
raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing
→Fashioning →Cleaning→ Assembly→Packing→Shipping
3.Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your
need.
4.Research & Development
We usually research the new needs of the market and develop the new model when there is new cars in the
market.
5.Quality Control
Every step should be special test by Professional Staff according to the standard of ISO9001 and TS16949.
6.Certification
Should your products require testing and certification to comply with international standards, we can arrange
this with independent, fully recognized testing companies such as SGS, Intertec, Bureau Veritas, Lloyd's
Register or the testing company of your choice.
OUR WORKSHOP
OUR SALES TEAM
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}