Belt Conveyor Electr Bet Scale Weighing Gallet, Sand

• Type: Customized, Cusomized
• Material: Customized, Cusomized
• Inside Material: Customized, Cusomized
• Feature: Oil-Resistant, Acid And Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant, Oil-Resistant, Acid and Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant, Oil-Resistant, Acid and Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant
• Tensile Strength: Customized, Strong
• Display Type: LED
• Model NO.: ICS-30A
• Measure Method: Automatic
• Application: Industrial Scales, Commercial Scale, Special Scales
• Function: Weighing Scale
• Accuracy: 0.25%
• Weighing: 1-8000t/H
• Location: Belt Conveyor Scale
• Structure: Suspension Structure
• Shape: Roller
• Usage: Conveyor Belt
• Transport Package: Wooden Case
• Specification: as per conveyor belt
• Trademark: X-ing
• Origin: China
• HS Code: 84
• Production Capacity: 1000

Product Description

Introduction:
Belt weigher is an automatic weigher that continuously weighs bulk materials on the conveyor belt without subdividing the mass or
interrupting the movement of the conveyor belt.

ICS-30 series electronic belt scale standard configuration of speed sensors are 60-12c type speed sensors. Single idler ics-30 weighing
bridge is adopted, with lever free and full suspension structure design, which is stable and reliable.

System composition

Ics-30a series belt weigher is mainly composed of four parts: ics-30 suspension weighing bridge, weighing sensor, 60-12c speed sensor and
2001 computer integrator. The accuracy is 1%.

Weighing bridge

The single idler ics-30 weighing bridge is adopted, and the lever free and fully suspended structure design is stable and reliable. The
structure design is calibrated with chain code, which is basically close to the physical calibration value. It is fully closed, moisture-proof, dust-
proof, anti-corrosion and reduces material accumulation, and will not cause zero instability caused by the use of knife edge device and
bearing device. Single piece structure, no moving parts, easy installation, no maintenance.

Speed sensor
Ics-30 series electronic belt scale standard configuration of speed sensors are 60-12c type speed sensors.
System accuracy:≤±1%
Power supply: 220 VAC, 50 Hz
Power: 50W

The weighing sensor
Platform type electronic strain sensor, specially designed strain compensation.
The specific technical parameters are as follows:
Enclosure: sealed protection
Nonlinear: < 0.03% FS
Non repeatability: < 0.01% FS
Creep: < 0.02% FS
Temperature sensitivity: interval: 0.0008% FS / of
                                       zero: 0.0015% FS / of
Overload capacity: 150% of sensor capacity

Weighing control instrument
Adopt 32-bit CPU and 24 bit a / D to speed up the operation speed and improve the metering accuracy;
All data of the belt scale are displayed on the high brightness four line vacuum fluorescent screen;
Menu panel operation mode, in line with people's computer operation habits;
When the relevant data of the belt scale is changed, the original data can be retained for inquiry to reduce human errors;
Provide multi-level password protection to facilitate different users; provide linear compensation to make the belt scale have the same
accuracy when the rated load is 25% to 100%;

Optional analog output for displaying material flow, weight or speed;
Analog output delay can be selected for actual control;
The analog input and output board (one or two voltage and current input and output) can be selected for control or compensation;
The RS-232 / RS-485 communication board can be selected, and one of the two modes can be selected from the hardware setting;
Models 2001 and 2105 of 2000 series instruments are available for users;

Model 201 weighing instrument
The display is a double screen digital display, the upper screen shows the cumulative flow, and the lower screen shows the instantaneous
flow;
The digital input and output are called out in the form of command code by pressing the key. For example, 01p represents the zero value;
Remote counting can be done in two ways: contact and non-contact. When there is no contact, the output is DC 24 V signal;
The optional communication board is used for upper computer communication, and the communication mode is RS-485 standard port;
Current output board can be selected to output standard 0-20mA or 4-20mA signal;
The output interface can be connected to MP or PP series parallel printer


                                                                             
Technical specification:

Model#	Calibration accuracy %	Weighing range(t/h)	Inclination of belt conveyor	Load cells(piece)	Metering idler(unit)	Pressure lever	Trunnion (piece)	Speed sensor (piece)
ICS-14A	±0.125	1-8000	≤6°	4	4	Suspension	None	1
ICS-14B	±0.125	1-8000	≤17°	4	3	Suspension	None	1
ICS-17A	±0.25	1-6000	≤17°	2	4	Double lever	4	1
ICS-17B	±0.25	1-4000	≤17°	2	2	Single lever	2	1
ICS-20A	±0.5	1-8000	≤17°	1	2	Double lever	2	1
ICS-20B	±0.5	1-8000	≤17°	1	1	Single lever	2	1
ICS-30A	±0.25	1-8000	≤17°	2	1	Suspension	None	1
ICS-30B	±0.25	1-8000	≤17°	1	1	Suspension	None	1
ICS-30-2TC-4C	±0.125	1-8000	≤17°	4	2	Suspension	None	1
SN-XF-4	±0.125	1-8000	≤6°	8	8	Suspension	None	1

Please advise your technical specification about existing belt conveyor and provide your technical
requirements about belt scale and installation dimension for us,we will supply different types of 
customized belt scale to you.

Reference:





OUR WORKSHOP

Our Services
 Pre-sale services:
1. Providing professional technical support.
2. Send the product catalog and instruction manual.
3. If you have any question PLS contact us online or send us email, we promise we will give you a reply at the first time!
 Sale of services:
1. We promise honest and fair, it's our pleasure to serve you as your purchasing consultant.
2. We guarantee punctuality, quality and quantities strictly implement the terms of contract.
After-sales service:
1. Where to buy our products for 1 years warranty and life long maintenance.
2. 24-hours telephone service.
3. A large stock of components and parts, easily-worn parts.
 
FAQ
Q:Why choose us ?
A: New power of embroidery  manufacturer with most advanced and stable technology, our own patent and invention, 
Golden supplier ,low price ,excellent quality , Prompt Delivery time ,reputation first ,customer first!
Q:How about the warranty?
A: All of our products have 12 months warranty.also will send a part of the accessories along with goods.
Q:What package dose your factory use?
A:International standard carton packaging or flight case as your requirement, using the EPE for safeguard,
they will protect the product not damage.
 Q:What paymet methods do you accept?
A:T/T,L/C, CASH, WESTERN UNION, Money Gram, 
Q:When you will ship the product after i send the money?
A:Its depend on order quantity, small order will take 3-5 work days, large order  will take 5-15days ,if the item
in store, we will ship 3days after the payment.
 Q:If have some problems, do you have any After Service?
A:Of course! Firstly, you need send the picture or video to us, let us make sure what's problem about the
product, if this problem can use parts to solve, we will send the replacements for free, if the problem can't solve,
We will replace it by courier or in your next order for compensation.
  
Packaging & Shipping
Standard Export Packing:
International standard carton packaging or flight case as your requirement, using the EPE for safeguard, they will
protect the product not damage.

Thanks for choosing X-ING as your reliable partner and please
trust both of us will create a brilliant future!