Parallel Type Electric Hydraulic Linear Actuator Pusher Push Rod Motorized Actuator

• Certification: FCC, CCC, RoHS, ISO, CE, ISO, CE, CCC, ISO, CE
• IP Rating: IP54, IP54
• Limit Switch: Built-in, Built-in
• Voltage: 12V 36V 48V 110V 220V 380V 400V, 380V
• Standard Stroke: Customized, Cusomized
• Max Thrust: Customized, Customized
• Model NO.: DYTP
• Warranty: 12 Month
• Transport Package: Container
• Specification: As per drawing
• Trademark: x-ing
• Origin: China
• HS Code: 8
• Production Capacity: 5000

Product Description

Overall Dimensions and Installation Dimension of DYTP ,DYTPS Parallel type electro -
hydraulic actuator 

Technical parameters:

Model	Shape size						installation size
	D	D1	L	L2	H2	R	L1	L3	H	I	d	H1	Ф1	M
DYTP450I	108	200	205	565	180	25	105	40	130	20	25	30	20	22×1.5
DYTP450II	108	200	205	570	180	25	105	40	130	20	25	30	20	22×1.5
DYTP450III	108	200	205	625	180	25	105	40	130	20	25	30	20	22×1.5
DYTP450IV	108	250	205	685	220	25	105	40	130	20	25	30	20	22×1.5
DYTP700I	108	200	220	570	180	25	120	40	130	30	35	30	20	27×2
DYTP700II	108	200	220	620	180	25	120	40	130	30	35	30	20	27×2
DYTP700III	108	250	220	685	220	25	120	40	130	30	35	30	20	27×2
DYTP700IV	108	250	220	715	220	25	120	40	130	30	35	30	20	27×2
DYTP1000I	133	200	220	585	200	35	120	60	180	30	35	40	30	27×2
DYTP1000II	133	250	220	655	220	35	120	60	180	30	35	40	30	27×2
DYTP1000III	133	250	220	685	220	35	120	60	180	30	35	40	30	27×2
DYTP1000IV	133	300	220	830	250	35	120	60	180	30	35	40	30	27×2
DYTP1500I	133	200	255	590	200	35	155	60	180	30	35	40	30	33×2
DYTP1500II	133	250	255	665	220	35	155	60	180	30	35	40	30	33×2
DYTP1500III	133	250	255	755	220	35	155	60	180	30	35	40	30	33×2
DYTP1500IV	133	300	255	900	250	35	155	60	180	30	35	40	30	33×2
DYTP2000I	165	250	265	655	240	45	165	70	200	40	40	40	40	42×2
DYTP2000II	165	250	265	710	240	45	165	70	200	40	40	40	40	42×2
DYTP2000III	165	300	265	920	260	45	165	70	200	40	40	40	40	42×2
DYTP3000I	165	250	285	660	240	45	165	70	200	40	40	50	40	48×2
DYTP3000II	165	250	285	710	240	45	165	70	200	40	40	50	40	48×2
DYTP3000III	165	300	285	935	290	45	165	70	200	40	40	50	40	48×2
DYTP5000I	165	250	335	705	240	55	205	80	200	40	40	60	50	52×2
DYTP5000II	165	300	335	920	260	55	2058	80	200	40	40	60	50	52×2
DYTP8000I	219	300	380	830	290	65	230	100	260	50	50	70	60	68×2
DYTP12000I	273	350	460	1040	350	75	260	110	320	60	70	80	70	85×2

Note: S for the trip (mm): when the dust cover L, L plus 0.1S, P-axis pin swing, Ps-tail suspension

Introduction:
DYTP series of electro-hydraulic linear actuator  for reciprocating push, pull straight (or reciprocating
rotation of a certain angle) movement, can be used to rise, drop or clamp the work of the place, can also be
used for long-distance and high-altitude dangerous areas, and computer Networked for centralized (program)
control. It is widely used in metallurgy, mining, coal, electricity, machinery, food, cement, chemical industry, water
conservancy, transportation, transportation, port equipment and other industries, is an indispensable
general power source. This product has the following advantages compared with the electric push rod cylinder
hydraulic cylinder:

1, electro-hydraulic putter can start with the load, and electric putter is very difficult.

2, the same electro-hydraulic putter in its rated push and pull range, the push and pull can be stepless
    adjustment, which has a wide range of driving force, and the electric putter and cylinder can not be done.

3, in the thrust and speed the same circumstances, the electro-hydraulic putter power consumption is electric
    putter and electric actuators half.

4, electro-hydraulic putter with full hydraulic drive, action sensitive, smooth operation, with effective mitigation of
    external impact, stroke control accuracy, cylinder, electric putter and electric actuator can not do.

5, electro-hydraulic putter with machine, electro-hydraulic integration of closed structure, the work of oil
    circulation in the pressure of the cylinder, small size, no oil, easy installation and maintenance. In the harsh
    environment of anti-dust, anti-water, the internal non-corrosive, life than the cylinder, electric putter, electric  
    actuator for a long time.

6, small investment. Cylinders need to build expensive air compressor station, air pressure pipe leakage, air
    pressure instability, high noise; hydraulic cylinder to be established pump station, and electro-hydraulic putter
    simply turn on the power can be used.

The working principle

1, electro-hydraulic putter is a mechanical and electrical integration of closed structure, which to the
    implementing agencies, control agencies and pressure pumps. Motor oil pump, hydraulic control valves and
    hydraulic cylinders can be mounted on the same axis, can also be installed on different axes as needed.
    Connected to the motor power supply, by controlling the motor reversing the two-way pump output pressure
    oil, the hydraulic control valve sent to the cylinder to achieve the reciprocating motion of the cylinder piston
    rod.

2, the hydraulic control valve group mainly by the relief valve, control valve, hydraulic check valve, etc., can
    also be based on the working characteristics of electro-hydraulic putter, the design of different functions of
    the oil combination valve to meet their work requirements. General introduction of self-locking, pull back from
    the lock and push-pull are self-locking; speed adjustable and non-adjustable type; the overall putter has a
    horizontal use, up to use, down use.

Order Note: Electro-hydraulic putter mainly by the putter installation form, the motor protection rating, rated
output power, travel, speed and use of angle, the six elements. Users can also support the special requirements
of three regulatory functions. Namely: speed adjustment, stroke adjustment (limit switch position). In addition to
these three regulatory functions must be specified when ordering. Other Please refer to the model preparation
method, fill in the six basic requirements.

Outline drawing:

1, Base 2, Coupling 3, Pump base 4, Pump 5, Fuel tank 6, Manifold block 7, Inspection mouth 8, Air filter 9, Cylinder base
10,Throttle valve 11, Locking circle nut 12 Cold 13 live cold ring 14, cylinder body 15, guide sleeve 16, cylinder head nut
17, dust cover 18, tighten the nut 19, connecting fork

Our workshop:

Our Service

1.Design Services
Our design team has experience in cardan shaft relating to product design and development. If you have any
needs for your new product or wish to make further improvements, we are here to offer our support.

2.Product Services
raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing Fashioning
→Cleaning→ Assembly→Packing→Shipping

3.Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your
need.

4.Research & Development
We usually research the new needs of the market and develop the new model when there is new cars in the
market.

5.Quality Control
Every step should be special test by Professional Staff according to the standard of ISO9001 and TS16949.

6.Certification
Should your products require testing and certification to comply with international standards, we can arrange
this with independent, fully recognized testing companies such as SGS, Intertec, Bureau Veritas, Lloyd's
Register or the testing company of your choice.