Industrial Motor Linear Actuator Heavy Duty Parallel Electric Linear Actuator

• Customization: Available
• Certification: FCC, CCC, RoHS, ISO, CE
• IP Rating: IP50
• Model NO.: DYTP
• Max Thrust: Customized
• Standard Stroke: Customized
• Voltage: 12V 48V 110V 220V 380V 400V
• Transport Package: Safety Transit Package
• Specification: As per drawing
• Trademark: X-ING
• Origin: China
• HS Code: 8
• Production Capacity: 5000sets/Month

Product Description

Introduction:
DYTP series of electro-hydraulic putter for reciprocating push, pull straight (or reciprocating rotation of a certain
angle) movement, can be used to rise, drop or clamp the work of the place, can also be used for long-distance
and high-altitude dangerous areas, and computer Networked for centralized (program) control. It is widely used
in metallurgy, mining, coal, electricity, machinery, food, cement, chemical industry, water conservancy,
transportation, transportation, port equipment and other industries, is an indispensable general power
source. This product has the following advantages compared with the electric push rod cylinder hydraulic
cylinder:
1, electro-hydraulic putter can start with the load, and electric putter is very difficult.
2, the same electro-hydraulic putter in its rated push and pull range, the push and pull can be stepless
    adjustment, which has a wide range of driving force, and the electric putter and cylinder can not be done.
3, in the thrust and speed the same circumstances, the electro-hydraulic putter power consumption is electric
    putter and electric actuators half.
4, electro-hydraulic putter with full hydraulic drive, action sensitive, smooth operation, with effective mitigation of
    external impact, stroke control accuracy, cylinder, electric putter and electric actuator can not do.
5, electro-hydraulic putter with machine, electro-hydraulic integration of closed structure, the work of oil
    circulation in the pressure of the cylinder, small size, no oil, easy installation and maintenance. In the harsh
    environment of anti-dust, anti-water, the internal non-corrosive, life than the cylinder, electric putter, electric
    actuator for a long time.
6, small investment. Cylinders need to build expensive air compressor station, air pressure pipe leakage, air
    pressure instability, high noise; hydraulic cylinder to be established pump station, and electro-hydraulic putter
    simply turn on the power can be used.

Working principle
1, electro-hydraulic putter is a mechanical and electrical integration of closed structure, which to the
    implementing agencies, control agencies and pressure pumps. Motor oil pump, hydraulic control valves and
    hydraulic cylinders can be mounted on the same axis, can also be installed on different axes as needed.
    Connected to the motor power supply, by controlling the motor reversing the two-way pump output pressure
    oil, the hydraulic control valve sent to the cylinder to achieve the reciprocating motion of the cylinder piston
    rod.
2, the hydraulic control valve group mainly by the relief valve, control valve, hydraulic check valve, etc., can
    also be based on the working characteristics of electro-hydraulic putter, the design of different functions of
    the oil combination valve to meet their work requirements. General introduction of self-locking, pull back from
    the lock and push-pull are self-locking; speed adjustable and non-adjustable type; the overall putter has a
    horizontal use, up to use, down use.

The electric actuator is a reciprocating actuator driven by a motor. It is suitable for all linear motion which needs
reciprocating and pushing. It can swing and rotate by means of other connecting rods. It has overload
protection (mechanical and electrical overload protection) It is widely used in metallurgy, electric power, coal,
chemical and other industries. It is widely used in metallurgy, electric power, coal, chemical industry and so on,
with the advantages of light weight, strong pulling force, low noise, low energy consumption and convenient
installation and maintenance. , Especially for long-distance, high-altitude and dangerous situations instead of
hydraulic, pneumatic devices, can be operated separately on-site and centralized control.

Because the nut is fixed relative to the push rod, the screw moves the push rod linearly along the guide rail in
the guide sleeve so as to make the push rod reciprocate. As a result, Push and pull action.

Technical parameters: 

Model	Rated output force(kg.f)		Rated sliding speed(mm/s)		Motor Power(kw)	Travel range(mm)
	thrust	pull	Push Speed	Pull speed
DYT450I	≤450	≤300	50	70	0.55	50~2000
DYT450II	≤450	≤300	100	150	0.75	50~2000
DYT450III	≤450	≤300	200	300	1.5	50~2000
DYT450IV	≤450	≤300	300	450	2.2	50~2000
DYT700I	>450-700	>300-500	50	70	0.75	50~2000
DYT700II	>450-700	>300-500	100	150	1.5	50~2000
DYT700III	>450-700	>300-500	150	220	2.2	50~2000
DYT700IV	>450-700	>300-500	200	300	4	50~2000
DYT1000I	>700-1000	>500-700	50	70	1.1	50~2000
DYT1000II	>700-1000	>500-700	100	150	2.2	50~2000
DYT1000III	>700-1000	>500-700	150	220	3	50~2000
DYT1000IV	>700-1000	>500-700	200	300	5.5	50~2000
DYT1500I	>1000-1500	>700-1000	20	30	1.1	50~2000
DYT1500II	>1000-1500	>700-1000	50	75	2.2	50~2000
DYT1500III	>1000-1500	>700-1000	80	120	4	50~2000
DYT1500IV	>1000-1500	>700-1000	120	180	5.5	50~2000
DYT2000I	>1500-2000	>1000-1500	20	30	2.2	50~2000
DYT2000II	>1500-2000	>1000-1500	50	75	4	50~2000
DYT2000III	>1500-2000	>1000-1500	95	140	7.5	50~2000
DYT3000I	>2000-3000	>1500-2000	20	30	2.2	50~2000
DYT3000II	>2000-3000	>1500-2000	40	60	4	50~2000
DYT3000III	>2000-3000	>1500-2000	75	110	7.5	50~2000
DYT5000I	>3000-5000	>2000-3000	30	45	4	50~2000
DYT5000II	>3000-5000	>2000-3000	50	70	7.5	50~2000
DYT8000I	>5000-8000	>3000-5000	30	45	5.5	50~2500
DYT12000I	>8000-12000	>5000-8000	19	27	11	50~2500

Order Note: Electro-hydraulic putter mainly by the putter installation form, the motor protection rating, rated
output power, travel, speed and use of angle, the six elements. Users can also support the special requirements
of three regulatory functions. Namely: speed adjustment, stroke adjustment (limit switch position). In addition to
these three regulatory functions must be specified when ordering. Other Please refer to the model preparation
method, fill in the six basic requirements
Overall Dimensions and Installation Dimension of DYTP ,DYTPS Parallel type electro - hydraulic putter

model	Dimensions						Installation dimensions
	D	D1	L	L2	H2	R	L1	L3	H	I	d	H1	Ф1	M
DYTP450I	108	200	205	565	180	25	105	40	130	20	25	30	20	22×1.5
DYTP450II	108	200	205	570	180	25	105	40	130	20	25	30	20	22×1.5
DYTP450III	108	200	205	625	180	25	105	40	130	20	25	30	20	22×1.5
DYTP450IV	108	250	205	685	220	25	105	40	130	20	25	30	20	22×1.5
DYTP700I	108	200	220	570	180	25	120	40	130	30	35	30	20	27×2
DYTP700II	108	200	220	620	180	25	120	40	130	30	35	30	20	27×2
DYTP700III	108	250	220	685	220	25	120	40	130	30	35	30	20	27×2
DYTP700IV	108	250	220	715	220	25	120	40	130	30	35	30	20	27×2
DYTP1000I	133	200	220	585	200	35	120	60	180	30	35	40	30	27×2
DYTP1000II	133	250	220	655	220	35	120	60	180	30	35	40	30	27×2
DYTP1000III	133	250	220	685	220	35	120	60	180	30	35	40	30	27×2
DYTP1000IV	133	300	220	830	250	35	120	60	180	30	35	40	30	27×2
DYTP1500I	133	200	255	590	200	35	155	60	180	30	35	40	30	33×2
DYTP1500II	133	250	255	665	220	35	155	60	180	30	35	40	30	33×2
DYTP1500III	133	250	255	755	220	35	155	60	180	30	35	40	30	33×2
DYTP1500IV	133	300	255	900	250	35	155	60	180	30	35	40	30	33×2
DYTP2000I	165	250	265	655	240	45	165	70	200	40	40	40	40	42×2
DYTP2000II	165	250	265	710	240	45	165	70	200	40	40	40	40	42×2
DYTP2000III	165	300	265	920	260	45	165	70	200	40	40	40	40	42×2
DYTP3000I	165	250	285	660	240	45	165	70	200	40	40	50	40	48×2
DYTP3000II	165	250	285	710	240	45	165	70	200	40	40	50	40	48×2
DYTP3000III	165	300	285	935	290	45	165	70	200	40	40	50	40	48×2
DYTP5000I	165	250	335	705	240	55	205	80	200	40	40	60	50	52×2
DYTP5000II	165	300	335	920	260	55	2058	80	200	40	40	60	50	52×2
DYTP8000I	219	300	380	830	290	65	230	100	260	50	50	70	60	68×2
DYTP12000I	273	350	460	1040	350	75	260	110	320	60	70	80	70	85×2

Note: S for the trip (mm): when the dust cover L, L plus 0.1S, P-axis pin swing, Ps-tail suspension
Overall Dimensions and Installation Dimension of DYTPg Parallel fixed electro - hydraulic putter
 

model	Dimensions					Installation dimensions
	D	D1	L	L2	H2	L1	L3	H1	H3	H4	Ф1	M
DYTPg450I	108	200	205	565	180	100	60	110	120	170	14	22×1.5
DYTPg450II	108	200	205	570	180	100	60	110	120	170	14	22×1.5
DYTPg450III	108	200	205	625	180	100	60	110	120	170	14	22×1.5
DYTPg450IV	108	250	205	685	220	100	60	110	120	170	14	22×1.5
DYTPg700I	108	200	220	570	180	110	70	110	120	170	14	27×2
DYTPg700II	108	200	220	620	180	110	70	110	120	170	14	27×2
DYTPg700III	108	250	220	685	220	110	70	110	120	170	14	27×2
DYTPg700IV	108	250	220	715	220	110	70	110	120	170	14	27×2
DYTPg1000I	133	200	220	585	200	110	70	130	200	260	18	27×2
DYTPg1000II	133	250	220	655	220	110	70	130	200	260	18	27×2
DYTPg1000III	133	250	220	685	220	110	70	130	200	260	18	27×2
DYTPg1000IV	133	300	220	830	250	110	70	130	200	260	18	27×2
DYTPg1500I	133	200	255	590	200	120	80	130	200	260	18	33×2
DYTPg1500II	133	250	255	665	220	120	80	130	200	260	18	33×2
DYTPg1500III	133	250	255	755	220	120	80	130	200	260	18	33×2
DYTPg1500IV	133	300	255	900	250	120	80	130	200	260	18	33×2
DYTPg2000I	165	250	265	655	240	130	90	160	210	280	22	42×2
DYTPg2000II	165	250	265	710	240	130	90	160	210	280	22	42×2
DYTPg2000III	165	300	265	920	260	130	90	160	210	280	22	42×2
DYTPg3000I	165	250	285	660	240	140	90	160	210	280	22	48×2
DYTPg3000II	165	250	285	710	240	140	90	160	210	280	22	48×2
DYTPg3000III	165	300	285	935	290	140	90	160	210	280	22	48×2
DYTPg5000I	165	250	335	705	240	170	100	160	210	280	22	52×2
DYTPg5000II	165	300	335	920	260	170	100	160	210	280	22	52×2
DYTPg8000I	219	300	380	830	290	200	105	220	320	420	26	68×2
DYTPg12000I	273	350	460	1040	350	250	115	270	400	520	32	85×2

Note: S for the trip (mm): when the dust cover L, L plus 0.1S


OUR WORKSHOP


OUR SALES TEAM

 

Thanks for choosing X-ING as your reliable partner
and please trust both of us will create a brilliant future!