Dytp2000000-300 Parallel Hydraulic Linear Actuator with Electric Motor

• Certification: ISO
• IP Rating: IP54
• Limit Switch: Built-in
• Voltage: Customerized
• Standard Stroke: 300mm
• Max Thrust: 200ton
• Model NO.: DYTP2000000-300
• Motor: Asynchronous Motor
• Transport Package: Wooden Case
• Specification: To be checked
• Trademark: X-ing
• Origin: China
• HS Code: 8
• Production Capacity: 1000

Product Description

Technical parameters:

model	thrust	speed	push distance	motor model
DYTP2000KN-300	2000KN	5-10 mm/s	300mm	7.5-15kW,380V

Introduction:
The electric actuator is a reciprocating actuator driven by a motor. It is suitable for all linear motion which needs reciprocating and pushing. It
can swing and rotate by means of other connecting rods. It has overload protection (mechanical and electrical overload protection) It is
widely used in metallurgy, electric power, coal,chemical and other industries. It is widely used in metallurgy, electric power, coal, chemical
industry and so on,with the advantages of light weight, strong pulling force, low noise, low energy consumption and convenient installation
and maintenance. , Especially for long-distance, high-altitude and dangerous situations instead of hydraulic, pneumatic devices, can be
operated separately on-site and centralized control.
Because the nut is fixed relative to the push rod, the screw moves the push rod linearly along the guide rail in the guide sleeve so as to
make the push rod reciprocate. As a result, Push and pull action.

Our company produced the DT type, HDG series of electric putt (electric cylinder). Push (pull) force from 0.25KN to 50KN; push and pull
stroke speed were 25mm / s, 42mm / s, 84mm / s. Is a smooth and accurate action, reliable performance, and has built-in overload
protection of the mechanical rotation device. In a very wide range of areas can replace or replace the cylinder, the cylinder, especially in high
temperature, fire,explosion-proof, pollution-free environmental conditions, is an indispensable supporting equipment.
The series, the specifications of the push and pull stroke size or speed (0-100mm / s) can be selected by the user.
To facilitate automatic control or to achieve a special trajectory, according to user requirements, can be
configured DC, frequency, step, speed and other special motor to meet the total control requirements.
Products are widely used in electricity, machinery, metallurgy, transportation, coal, chemicals, food processing and other departments. 

Technical specification:

DYTPType Parallel hydraulic technical parameters:
Model		Thrust(Kgf)		Speed(mm/s)		Motor power	Stroke	Speed
		Push force	Pull force	Push speed	Pull speed	(kw)	(mm)	(mm)
DYTP	450	450	300	45/70/115/160	65/100/145/200	0.55/0.75/0.75/1.1	5-1000	5-250
	750	750	500	30/45/70/100	43/65/100/165	0.55/0.75/1.1/1.1	5-1500	5-170
	1000	1000	700	30/45/70/100	43/65/100/145	0.75/1.1/1.5/2.2	5-1500	5-170
	1750	1750	1300	30/45/70/100	43/65/100/145	0.75/1.5/2.2/3.0	5-1500	5-170
	2500	2500	1900	24/36/60/97	36/53/90/144	1.1/1.5/2.2/3.0	5-2000	5-150
	3000	3000	2200	18/27/45/70	27/40/68/108	1.1/1.5/2.2/3.0	5-2500	5-110
	4000	4000	3000	14/35/55/70	21/53/85/108	1.1/2.2/3.0/4.0	5-2500	5-85
	5000	5000	3800	18/30/48/60	23/39/63/78	1.5/2.2/3.0/4.0	5-2500	5-75
	6000	6000	4500	18/30/48/60	23/39/63/78	1.5/3.0/4.0/5.5	5-3000	5-75
	8000	8000	6500	10/18/25/38	13/23/33/47	1.5/2.2/3.0/4.0	5-3000	5-50
	10000	10000	8100	8/14/20/30/39	10/17/25/37/48	1.5/2.2/3.0/4.0/5.5	5-3000	5-39
	15000	15000	11500	7/12/19/24/30	8/14/22/28/36	1.5/3.0/4.0/5.5/7.5	5-3000	5-30
	20000	20000	16000	5.5/9.5/15/19/23	6.5/11/18/22/27	2.2/3.0/4.0/5.5/7.5	5-3000	5-23

Model# introduction:

Structure drawing:

DYTP Type parallel hydraulic linear actuator outline drawing
Model#		(mm)Outline dimension: S-stroke								(mm)Installation size
		LC	LC1	L	L1	L2	L3	L4	d	d1	d2	d3	D	D1	D2	M	N	E	F
DYTP	450	81+S	138+S	253+S	24	30	308	246	φ20	18	φ40	φ12	146	200	175	220	160	190	336
	750	125+S	148+S	303+S	30	45	315	246	φ30	25	φ60	φ20	146	200	175	225	165	190	336
	1000	125+S	148+S	303+S	30	45	315	261	φ30	25	φ60	φ20	146	200	175	225	165	190	336
	1750	125+S	148+S	303+S	30	45	325	286	φ30	25	φ60	φ20	146	200	195	225	165	190	336
	2500	125+S	148+S	303+S	30	45	325	286	φ30	25	φ60	φ20	159	200	195	242	182	210	369
	3000	155+S	148+S	323+S	40	50	331	316	φ30	30	φ70	φ30	159	250	215	242	182	220	379
	4000	155+S	168+S	343+S	40	50	331	316	φ40	30	φ70	φ30	159	250	215	242	182	220	379
	5000	155+s	168+s	343+s	40	50	334	316	φ40	30	φ70	φ30	180	250	215	290	210	240	420
	6000	200+s	168+s	356+s	42.5	55	334	316	φ50	35	φ75	φ35	180	250	215	290	210	240	420
	8000	200+s	178+s	365+s	42.5	55	341	316	φ50	35	φ75	φ35	219	250	215	330	250	250	469
	10000	200+s	178+s	365+s	42.5	55	341	336	φ50	35	φ75	φ35	219	250	240	330	250	250	469
	15000	200+s	188+s	388+s	50	60	348	391	φ60	45	φ90	φ40	245	300	275	380	280	280	545
	20000	200+s	208+s	408+s	50	60	348	391	φ60	45	φ120	φ40	300	300	275	440	340	320	620

select dytp parallel electro-hydraulic push rod, you need to know:

1. The voltage grade of the motor in the above list is 380V, the protection grade is IP44, and the insulation grade is B (660 / 1140 or 415V,
the protection grade is IP54, IP55, IP65, or high temperature (120 ºC) and other special motors can be equipped according to the user's
requirements.

2. The motor model and power in the table refer to the maximum power of the push rod at rated output force and rated speed, and the motor
power is proportional to the push-pull force.

3. The rated speed in the table is the normal speed. If there are special requirements for push-pull speed, it should be explained when 
ordering. If it exceeds the manufacturing range of the stroke in the table, it must be explained when ordering.

4. If there is no special instruction, the altitude of the place where the electro-hydraulic push rod is used is not more than 1000m, the monthly
average maximum relative humidity is not more than 90%, the working environment temperature of the electro-hydraulic push rod is: - 5 ~ +
50 ºC, and the working medium varies with the environment temperature. Select the appropriate hydraulic oil (- 5 ~ + 20 ºC) and use 32 >
anti-wear hydraulic oil (l-hm32) and + 20 ~ + 50 ºC and 46 > anti-wear hydraulic oil (l-hm46) )The hydraulic oil needs to be filtered before
filling, and the filtering accuracy is more than 100 μ M.

Application

OUR WORKSHOP

OUR SALES TEAM

Thanks for choosing X-ING as your reliable partner and please trust both of
us will create a brilliant future!