Dti Sereis Electric Motor Drive Linear Actuator with External Mechanism for Stroke Adjustment

• Certification: ISO
• IP Rating: IP54
• Limit Switch: Built-in
• Standard Stroke: 500mm
• Max Thrust: 1000n
• Voltage: 380V
• Model NO.: DTIA100050H
• Driver: Motor
• Transport Package: Safety Transit Package
• Specification: As per drawing
• Trademark: VILLE
• Origin: China
• HS Code: 8
• Production Capacity: 1000000

Product Description

Introduction:
The electric actuator is a reciprocating actuator driven by a motor. It is suitable for all linear motion which needs
reciprocating and pushing. It can swing and rotate by means of other connecting rods. It has overload
protection (mechanical and electrical overload protection) It is widely used in metallurgy, electric power, coal,
chemical and other industries. It is widely used in metallurgy, electric power, coal, chemical industry and so on,
with the advantages of light weight, strong pulling force, low noise, low energy consumption and convenient
installation and maintenance. , Especially for long-distance, high-altitude and dangerous situations instead of
hydraulic, pneumatic devices, can be operated separately on-site and centralized control.
Because the nut is fixed relative to the push rod, the screw moves the push rod linearly along the guide rail in
the guide sleeve so as to make the push rod reciprocate. As a result, Push and pull action.
DT type electric linear actuator
Our company produced the DT type, HDG series of electric putt (electric cylinder). Push (pull) force from
0.25KN to 50KN; push and pull stroke speed were 25mm / s, 42mm / s, 84mm / s. Is a smooth and accurate
action, reliable performance, and has built-in overload protection of the mechanical rotation device. In a very
wide range of areas can replace or replace the cylinder, the cylinder, especially in high temperature, fire,
explosion-proof, pollution-free environmental conditions, is an indispensable supporting equipment.
The series, the specifications of the push and pull stroke size or speed (0-100mm / s) can be selected by the
user.
To facilitate automatic control or to achieve a special trajectory, according to user requirements, can be
configured DC, frequency, step, speed and other special motor to meet the total control requirements.
Products are widely used in electricity, machinery, metallurgy, transportation, coal, chemicals, food processing
and other departments. 

Model# introduction:

Outline drawing:


OUR WORKSHOP

OUR SALES TEAM
Our Service

1.Design Services
Our design team has experience in cardan shaft relating to product design and development. If you have any
needs for your new product or wish to make further improvements, we are here to offer our support.

2.Product Services
raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing Fashioning
→Cleaning→ Assembly→Packing→Shipping

3.Samples Procedure
We could develop the sample according to your requirement and amend the sample constantly to meet your
need.

4.Research & Development
We usually research the new needs of the market and develop the new model when there is new cars in the
market.

5.Quality Control
Every step should be special test by Professional Staff according to the standard of ISO9001 and TS16949.

6.Certification
Should your products require testing and certification to comply with international standards, we can arrange
this with independent, fully recognized testing companies such as SGS, Intertec, Bureau Veritas, Lloyd's
Register or the testing company of your choice.


Thanks for choosing X-ING as your reliable partner and please
trust both of us will create a brilliant future!