Electric Pneumatic Straight Type Linear Actuator

• Certification: FCC, CCC, RoHS, ISO, CE, ISO, CE, ISO
• IP Rating: IP50, IP54
• Limit Switch: Built-in, Built-in
• Voltage: 12V 48V 110V 220V 380V 400V, 380V
• Standard Stroke: Customized, Cusomized
• Max Thrust: Customized, Customized
• Model NO.: QSG
• Phase: 3
• Transport Package: Safety Transit Package
• Specification: As per drawing
• Trademark: X-ING
• Origin: China
• HS Code: 8
• Production Capacity: 100000

Product Description

Electric Motor Hydraulic pneumatic Cylinder linear actuator 

Introduction:
The electric actuator is a reciprocating actuator driven by a motor. It is suitable for all linear motion which needs
reciprocating and pushing. It can swing and rotate by means of other connecting rods. It has overload
protection (mechanical and electrical overload protection) It is widely used in metallurgy, electric power, coal,
chemical and other industries. It is widely used in metallurgy, electric power, coal, chemical industry and so on,
with the advantages of light weight, strong pulling force, low noise, low energy consumption and convenient
installation and maintenance. , Especially for long-distance, high-altitude and dangerous situations instead of
hydraulic, pneumatic devices, can be operated separately on-site and centralized control.
Because the nut is fixed relative to the push rod, the screw moves the push rod linearly along the guide rail in
the guide sleeve so as to make the push rod reciprocate. As a result, Push and pull action.

Technical data and performance parameters
1, the working environment:
A, ambient temperature: -25 ºC -50 ºC
B, not more than 1500m above sea level
C, relative humidity: <80%
D, does not contain strong corrosive, flammable, explosive media
E, no strong vibration.
2, short-term work system, rated working time ≤ 15 minutes.
3, the model meaning (such as right):
4, the performance parameters:

NO.	Project	DSG2	DSG3	DSG4	DSG5	DSG6
1	Section number	2	3	4	5	6
2	Static height(mm)	1895	1955	2040	2075	2155
3	Rise height(mm)	3370	4910	6440	8005	9555
4	Weight(kg)	50
5	Working pressure(kgf/cm^2)	2
8	Voltage(v)	12,24,220				220

The structure and performance:
The whole multi-section pneumatic lifting rod system consists of air compressor, air tank, filter, pressure
regulator, oil mist, intake solenoid valve, multi-section lifting rod, outlet electromagnetic valve, pneumatic control
part and electrical control part .
Lifting rods made of double-die aluminum alloy cylinder liner manufacturing, the surface after hard oxidation,
wear-resistant, honing straight after the high precision, coupled with the international division of the Secretary-
line production of seals, packing performance Increase, the design of the use of voltage, current limiting, buffer
and other methods, so that each section to speed up to avoid a large impact when the lift to achieve a smooth
lift.
In the inlet and outlet pipe used two normally closed two two-way solenoid valve, and is equipped with special
electronic control circuit, can achieve the electrical control movements movements.
Specific lift speed depending on the actual pressure and PTZ lamp weight, the user may be appropriate to
adjust. As a result of the overall use of hard aluminum alloy, so the overall weight than with steel greatly
reduced, easy to move and transport.
If the user to achieve remote control or program-controlled, you need to specify when ordering, add remote
control or program-controlled devices.
 QSG

Type	Lmin	Lmax	D	D1	d	D2	D3
DSG2	1895	3370	140	110	10	75	80
DSG3	1955	4910	160	130	10	95	100
DSG4	2040	6440	190	160	12	115	110
DSG5	2075	8005	200	170	14	135	130
DSG6	2155	9555	230	200	14	160	150

Note: PTZ board can be designed according to user needs

Structure:


OUR WORKSHOP


OUR SALES TEAM


Thanks for choosing X-ING as your reliable partner and please
trust both of us will create a brilliant future!