Electric Linear Motor Linear Actuator 200mm Stroke

• Certification: FCC, CCC, RoHS, ISO, CE, ISO
• IP Rating: IP50, IP54
• Limit Switch: Built-in, Built-in
• Voltage: 12V 48V 110V 220V 380V 400V, 220V 380V
• Standard Stroke: Customized, 400mm
• Max Thrust: Customized, 1000n
• Model NO.: DTI/63/200
• Motor: Asynchronous Motor
• Transport Package: Wooden Case
• Specification: 200*96*105 (cm)
• Trademark: X-ing
• Origin: China
• Production Capacity: 1000

Product Description

Technical parameters:

model	thrust	speed	push distance	motor model
DTI-63-200	63KG	76	20CM	JW5612

Product:

Introduction:
The electric actuator is a reciprocating actuator driven by a motor. It is suitable for all linear motion which needs
reciprocating and pushing. It can swing and rotate by means of other connecting rods. It has overload
protection (mechanical and electrical overload protection) It is widely used in metallurgy, electric power, coal,
chemical and other industries. It is widely used in metallurgy, electric power, coal, chemical industry and so on,
with the advantages of light weight, strong pulling force, low noise, low energy consumption and convenient
installation and maintenance. , Especially for long-distance, high-altitude and dangerous situations instead of
hydraulic, pneumatic devices, can be operated separately on-site and centralized control.
Because the nut is fixed relative to the push rod, the screw moves the push rod linearly along the guide rail in
the guide sleeve so as to make the push rod reciprocate. As a result, Push and pull action.

Our company produced the DT type, HDG series of electric putt (electric cylinder). Push (pull) force from
0.25KN to 50KN; push and pull stroke speed were 25mm / s, 42mm / s, 84mm / s. Is a smooth and accurate
action, reliable performance, and has built-in overload protection of the mechanical rotation device. In a very
wide range of areas can replace or replace the cylinder, the cylinder, especially in high temperature, fire,
explosion-proof, pollution-free environmental conditions, is an indispensable supporting equipment.
The series, the specifications of the push and pull stroke size or speed (0-100mm / s) can be selected by the
user.
To facilitate automatic control or to achieve a special trajectory, according to user requirements, can be
configured DC, frequency, step, speed and other special motor to meet the total control requirements.
Products are widely used in electricity, machinery, metallurgy, transportation, coal, chemicals, food processing
and other departments. 

Technical specification:

NO.	Type	Trust (kg)	Route (mm)	Speed (mm/s)	Motor		380(V)		Le(mm)		contour dimension (L*W*H)mm	weight (kg)
					Type	Power (w)	Revolution (T/Min)	Electricity (A)	LeMin	LeMax
1	25-20-I	25	200	48	AO25024	40	1400	0.23	369	569	580*125*118	7.5
2	25-20-II	25	200	96	AO25022	60	2800	0.23	369	569	580*125*118	7.5
3	100-40-I	100	400	42	AO5624	120	1400	0.47	640	1040	858*152*206	23
4	100-40-II	100	400	84	AO5622	180	2800	0.52	640	1040	858*152*206	23
5	300-50-I	300	500	42	AO6334	370	1400	1.12	745	1245	998*170*226	35
6	300-50-II	300	500	84	AO6332	550	2800	1.38	745	1245	998*170*226	35
7	500-50-I	500	500	50	AO7134	750	1400	2.02	778	1278	1098*190*226.5	52
8	500-50-II	500	500	100	AO7132	1100	2800	2.6	778	1278	1098*190*226.5	52
9	700-60-I	700	600	50	AO7134	750	1400	2.02	803	1343	1193*200*279	63
10	700-60-II	700	600	100	AO7132	1100	2800	2.6	803	1343	1193*200*279	63
11	1000-60-I	1000	600	50	JO2-21-4	1100	1400	2.68	883	1483	1260*204*271	75
12	1000-60-II	1000	600	100	JO2-21-2	1500	2860	3.24	883	1483	1260*204*271	75
13	1600-80-I	1600	800	50	JO2-31-4	2200	1400	4.9	1063	1863	1535*302*330
14	1600-80-II	1600	800	100	JO2-31-2	3000	2860	8.06	1063	1863	1535*302*330

1, Base 2, Coupling 3, Pump base 4, Pump 5, Fuel tank 6, Manifold block 7, Inspection mouth 8, Air filter 9,
Cylinder base 10, Throttle valve 11, Locking circle nut 12 Cold 13 live cold ring 14, cylinder body 15, guide
sleeve 16, cylinder head nut 17, dust cover 18, tighten the nut 19, connecting fork

OUR WORKSHOP

OUR SALES TEAM

FAQ:
Q:Are you trading company or manufacture ?
A:We are real manufacture
Q:How long is your delivery time?
A:Generally it is 20-30days if the goods are in stock. or it is 30-40days if the goods are not in stock,it is
  according to order quantity.
Q:What is your payment term?
A:Payment <=2000USD,100% in advance. Payment >=2000USD,30%T/T in advance,balance before shippment. or By Irrevocable L/C at sight.
Q:Do you provide samples? is it free or extra?
A:Yes,we could offer the sample with cost price or free charge, but do not pay the cost of freight.

If you have another question,pls feel free to contact us as below:
X-ING  linear actuator co.,limited.
Commercial Manager: Jennifer Yang
  
 
 
x-ingconveyor.en.made-in-china.com

Thanks for choosing X-ING as your reliable partner and please
trust both of us will create a brilliant future!